It is difficult to detect the original steel pot from counterfeit samples, but if you take some time and learn how to identify the technical and technical features of the steel pot, you may probably open the fist of fraudulent vendors. In this article, by examining the difference between the original and counterfeit stainless steel pot, we have mentioned the most important tips and methods of diagnosing the original steel pot.
Use the magnet to detect the original steel pot
The first and most reliable way to detect the original steel pot is to test the magnet. High quality stainless steel, such as 304 or 18/10, usually has little magnetic properties or does not absorb magnets at all. While cheaper steel, like 430, reactions to the magnet. Fake pots are also often more magnetic. Therefore, this method can be the first criterion for examining the principle.
Attention to the appearance and detail of the construction
The surface of the steel pot is a glossy, polished and wave -free, and components such as handles or doors are installed with precision and firmness. In counterfeit pots, the product surface is quickly or stained, and there is even a possibility of rust. Also, the joints in these pots often do not have the necessary quality and are easily loose or separated.
The stainless steel pot has a balanced weight
The weight of the steel pot is neither very light nor too heavy. That is, it is both a sense of durability and it is not difficult to lift. Light pots are often made of thin, low -quality sheets and have low durability. On the other hand, pots that are too heavy are probably produced with inappropriate and non -standard metals.
Diagnosis through the sound of hitting
Taping the pot body with a metal spoon or similar device can determine the difference between the original and counterfeit steel pot. The stainless steel pot produces a transparent, alarm sound that remains in space for a few moments. In contrast, the fake pot creates a short and short sound that is quickly interrupted. This difference indicates the quality of the alloy and body strength.
Experiment with acidic food
Using substances such as vinegar or lemon juice is another way to examine the authenticity of the pot. Simply boil a small amount of these ingredients in the pot and then check the inner surface. If there is no change in color, stain or corrosion, it indicates the high quality of the steel. But changing the appearance of the inner surface of the pot will indicate its fake or quality.
The examination of the thickness and layers of the floor
One of the features of the original steel pot is the uniform thickness in the body and the multilayer of the floor. High quality pots are usually 2 to 3 mm thick and their foam is made of multi -layer acetyl with aluminum or copper. This structure causes uniform heat transfer and increases resistance to deformation. Fake pots usually have thinner foam and lack standard layers.
Olfactory test to detect quality
The original steel pots have no special smell because they are produced from standard alloys without impurities. In contrast, counterfeit pots may have the odor of raw metal or chemicals. If even after the initial washing, the odor remains unpleasant, it can be concluded that the product is not of good quality.
Maintain the glow after washing
High quality steel remains shiny and bright even after washing with mild detergents and lukewarm water. If the pot is blurred or stains on the surface after washing, it may indicate the use of low -quality or non -standard alloys. Original pots also maintain their original appearance against continuous washing.
Source: DigiKala Meg
RCO NEWS




