The most important tips for choosing an LED panel

LED panel Today, it is one of the most popular and important lights in the integrated lighting of spaces that need uniform light. Spaces such as offices, lobbies, hospitals, banks, libraries, or large stores are among the spaces that need uniform and high-quality light, and the LED panel with its high-quality light can meet the expectations of basic lighting in these spaces. The LED panel works in such a way that its light shines from the back of the milky-colored taluk called a diffuser, and therefore it does not cause glare and harm to the eyes. That’s why this lamp is suitable for different spaces that need glare-free light. It is a lamp that is produced in the form of circle, square and rectangle in different powers and models. The light of this lamp shines indirectly from behind a milky-colored cover, which is called a diffuser or talaq, and because of this, the emitted light is both diffused and causes less damage to the eyes. In the following, we have discussed the most important points that you should pay attention to before buying an LED panel:

1. The power of the LED panel should be suitable for the use of your space

Usually, the most important criterion for the initial measurement of the light output of each lamp is its power consumption. Of course, to measure the light in principle, you have to pay attention to the lumen output of the lamp, but naturally, the light of a 60 watt panel is more than a 15 watt panel. To choose an LED panel, you should make sure that the power consumption of your panel is such that your space is neither dark nor too bright.

1. The efficiency of the LED panel determines the output light and your electricity consumption.

LED panel efficiency means how much light the lamp emits per watt of electricity consumption. Naturally, the higher the efficiency of the LED panel, the more light it emits for less electricity consumption. The important point is that it should be noted that the efficiency declared by the LED panel manufacturer is related to the light output from the lamp or the light output from the chip. If the efficiency is related to the light output from the chip, it should be taken into account that the light will drop after leaving the light diffuser and its efficiency will eventually decrease.

1. The radiation angle of the ceiling panel is important in light distribution.

The radiation angle of the ceiling LED panel indicates the radiation radius that illuminates the light of the panel. Naturally, the larger the panel’s radiation angle, the more diffused the light will be and it will light up more space; Of course, it should be noted that increasing the radius of radiation decreases the intensity of radiation. In general, since the main use of the LED panel is to spread uniform light, it is better that its radiation angle is more than 90 degrees to illuminate a wider space without causing glare.

1. Useful space available on the surface of the ceiling panel for light output.

The body of the LED panel consists of a frame, a reflector and a diffuser. In the front part of the panel, i.e. the part that can be seen after installation, you can see the frame around the diffuser and the diffuser itself. The thicker the frame around the panel is, the less useful space the light shines through and the more the light will fall. Therefore, one of the important points in choosing an LED panel is that, for example, in a 60 x 60 cm LED panel, which area of ​​this 60 x 60 space is where the light passes. The more ambient light has to exit, in other words, the smaller the thickness of the frame around the panel light diffuser, the more beautiful and diffused lighting you will have.

1. Placement of LED panel to increase the effectiveness of light

Naturally, in any project that requires lighting using LED panels, the main goal is to provide uniform light with sufficient light distribution in the space. For this reason, before buying the LED panel needed for your space, you should first consider the placement of the panels in such a way that there are not many dark and bright spots between them and the light shines uniformly on all areas.

Source:Ecowat/ecowat