What is the Serpantein Belt and what is the difference with the timing belt?

One of the most important car parts that plays an important role in the proper functioning of the propulsion is the timing belt and Serpantine belt. What is the difference between these two?

Today’s cars are dependent on a set of different parts to work properly. These include the smallest bolts to large components such as crankshaft and cylinder block, each with a specific task. The precise coordination of these components causes the power to be transmitted to the wheels and the car moves.

List of Content

The difference between serpentine straps and timing belts

One of the most important and widely used components in the car engine system is belts. These belts are made in different sizes and designs, each with a specific task. Among them, some straps are far more well -known and play a more prominent role in the proper performance of the car. Time belt and butterfly belt, also known as Serpantine, are two of the most important types of car belts. There are many similarities between these straps, but their performance is different. A good understanding of the task of each can help keep the car better and prevent costly breakdowns.

Time and Serpantine Belt play an important role in the proper engine performance, but their performance is quite different. These two pieces can be considered one of the most important components of the engine system that have completely independent tasks, so it is important to know the difference between them for proper maintenance.

In most cars, the timing belt is mounted next to the engine and is usually under a cover called Time Belt. The task of this belt is to coordinate the rotation of the lame and the camshaft. This coordination is essential for timely opening and closure of the valves, and if it does not perform well, the combustion will not be done at the right time.

In contrast, the serpentine strap, or the butterfly belt, is located in the front of the engine and can be seen without any special coating. The appearance of this strap is such that it rotates around several money and moves like a snake. In some cars, this belt is well known and easier to repair.

Read more

Serpantin’s belt and its duty

We said that the other name of the Serpantin belt is the butterfly belt, which provides the force needed to move important parts such as the alternator, the cooler compressor and the hydraulic steering pump. The belt is made of very durable rubber and is wrapped around several money to rotate them.

With the help of Serpantine strap, the engine force is transferred to the above parts and guarantees their proper operation. The direct connection of this belt to the crankshaft makes the alternator and the compressor of the air conditioner coordinate and activated. While the timing belt is responsible for adjusting the valve time, the Serpantin belt provides the force needed for engine peripherals.

The power of the intra -burner motors is provided through small explosions inside the car’s cylinder. These explosions cause the piston to move in the cylinder and eventually rotate the crankshaft. One side of the crankshaft is attached to the gearbox and the other side attaches to the front or side money of the engine.

When the crankshaft turns, the money begins to move. The Serpantein belt is closed around this money and transfers its force to other money to work properly, such as the air conditioner compressor and the hydraulic steering pump. The belt, also known as the Butterfly Belt, is very durable but has a specific life span.

The time of replacement of the Serpantine strap depends on the type of car and its use, but it is usually recommended that you replace it every 2 to 6,000 kilometers. Of course, the belt may be worn out before this distance, so it is always best to check its status and make sure its performance is healthy to prevent sudden failures.

Read more

Time belt and its task

Time Belt is one of the main components of the car engine that is tasked with accurately coordinating the interior of the engine. As mentioned earlier, the controlled explosions within the cylinder cause the piston to move and thus rotate the crankshaft. This rotation is also transmitted to parts such as Serpantin’s belt.

Alongside this process, the timing belt is also connected to the crankshaft and acts with it to rotate the desire of the camsses exactly according to the movement of the pistons. This synchronization allows the engine to open and close the valves at the right time, resulting in the proper amount of fuel and air into the cylinder.

If the timing belt fails to make this coordination properly, the valves may not be open or closed on time, causing the fuel or air to enter the combustion chamber, and the explosions may be too severe or too weak. Ultimately, such a disorder can cause serious damage to the sensitive parts of the engine.

At first glance, the performance of the timing belt may seem a bit complicated, but its performance is like an adhesive that coordinates all components of the combustion process. Of course, this coordination is done correctly when the strap is accurate and standard. In other words, if the belt is too firm or too loose, the engine’s operation will be in trouble.

That is why it is important for every driver to pay attention to the health of the timing belt. While some modern cars use timing chains, most of the cars in the country’s market are still equipped with timing belts. This belt becomes depreciated over time and may cause heavy damage to the engine if ignored.

Automakers recommend that the timing belt should be replaced every 2 to 5,000 kilometers to prevent high repair costs. Some drivers ask if this belt can be replaced at home? In the case of serpentine strap, this may be done with a simple and a little bit of experience, but replacement of the timing belt requires a carbold mechanics due to its high sensitivity.

Read more