As long as the package is not in trouble, no one thinks about it. Unless we wake up one cold winter morning and have no hot water. That’s the moment when we understand how important a quality package is. When buying the best Iranian radiator package for 24,000, we have no shortage of stories. The sellers each offer a model, the prices are close to each other, the appearance of the devices are almost similar to each other, and names like L24FF, M24FF and A24FF just raise a lot of questions for those of us without technical expertise? Why does one have a higher price? Which one causes less trouble and is the more logical choice? All models of the Iran Radiator package have been considered among the best-selling products in the market for many years, because they are designed according to the conditions of Iranian apartments; Neither too big and high consumption nor weak and underpowered, but they have small differences that we are going to examine in this article.
Criteria for buying the best package of Iran Radiator 24000
- Determine the exact size of the residential unit and choose the capacity of the package according to it.
- Consider the climatic conditions of the region (cold, temperate or tropical) in calculating the heating power.
- Pay attention to the water pressure of the building, because some models perform better at low pressure.
- Choose the type of heat exchanger (single exchanger or double exchanger) based on the water quality of the area.
- Consider thermal efficiency higher than 90% for optimal gas consumption.
- Check the volume of the expansion source according to the number of radiators and the volume of the heating circuit.
- Pay attention to the fan volume and quiet operation of the device, especially in apartments.
- Consider the existence of a digital diagnostic system and error display as a practical advantage.
Technical comparison table of the best Iran radiator package 24000
| Technical characteristics | L24FF | M24FF | A24FF |
| Product type | Wall package of two fan converters with digital control | Wall package of two fan converters with analog control | Wall package of two fan converters with digital panel |
| Thermal efficiency | ~93% | ~93% | ~93% |
| Heat exchanger type | Two converters | Two converters | Two converters |
| Maximum pressure of the heating circuit | 3 bars | 3 bars | 3 bars |
| Maximum water temperature | 60 °C | 60 °C | 60 °C |
| expansion source (capacity) | ~6 lit | ~6 lit | ~6 lit |
| Electricity consumption | ~137 W | ~137 W | ~137 W |
| Control and display | Digital with debugger | Analog — no digital display | Digital with simple panel |
| Combustion chamber | fan pack | fan pack | fan pack |
Introducing the best package of Iran radiator 24000
In the following, we will introduce the best models of Iran radiator wall package with a capacity of 24,000.
Iran radiator package 24000 model L24FF
The L24FF model is one of the best-selling wall packages with a capacity of 24,000 in the Iranian market; A model that is considered to be the gold standard of this category. This device is a fan-type gas burner with a closed combustion chamber, that is, it supplies the air needed for combustion from outside and also directs the smoke outside with the help of a fan; Therefore, it is perfectly suitable for installation in apartments, even units with small balconies. The use of two heat exchangers system makes the hot water consumption and the heating circuit separate; This improves the quality of hot water and reduces sedimentation.
The maximum heat output of this model is about 24 kW and its efficiency is above 90% (around 92-93%). This means that most of the gas energy is converted into useful heating. The input power is about 25 to 26 kW. The digital panel has an automatic troubleshooting system and displays an error code in case of a problem (pressure drop, ignition problem, switch pressure error, etc.). Also, systems such as anti-freezing, anti-jamming pump and three-way valve, and intelligent flame control are built into it, which increases the lifespan of the parts.

Opening on the Digikala page
Iran radiator package 24000 model M24FF
The M24FF model can be considered a simpler version with a capacity of 24,000. This device also has a fan and a closed combustion chamber and works with a two-converter system; Therefore, in terms of thermal structure, it is not much different from L series. Its thermal efficiency is above 90% and its output power is around 24 kW. The maximum input power is nearly 26 kW and its power consumption is similar to other models in this category, about 130 W.
You might ask, so what is the difference with the L series? The main difference between M24FF and L series is the type of control. This model has analog control (volume); That means there is no advanced digital display and numerical error code. This simplicity is an advantage for many users, because it is easier to work with and temperature adjustment is done with rotary volumes. Also, the cost of repairs is less because the control circuit is less complicated.
The volume of the expansion source in this model is usually around 5 to 6 liters, which is enough for conventional residential units. This package can cover units up to 140 or even 150 square meters (under proper insulation conditions). In terms of safety, systems such as minimum water pressure control, limit thermostat, air and smoke pressure switch, and antifreeze system are built into it.

Opening on the Digikala page
Iran radiator package 24000 model A24FF
The A24FF model is a combination of a balanced price and acceptable features in the 24000 class. This device is also gas-burning, with a fan and two converters, and in terms of heat capacity, it is placed in the same category of 24 kW. Its efficiency is above 90% and the input power is about 25 to 26 kW. The volume of the expansion source in this model is usually 6 liters and is sufficient for most residential units.
In terms of control, the A24FF has good features. It has a simple digital display and diagnostic system, although its features are more limited than the L series. You can adjust the hot water temperature and the heating circuit independently, and the device itself is automatically adjusted between summer and winter mode.
Its electricity consumption is around 120 to 140 watts, which is not a high figure compared to the total household consumption. It is also compact in terms of dimensions and you will not face any problem to install it inside the cabinet or balcony. It goes without saying that it has standard safety systems such as flame control, smoke sensor and protection against lack of water.

Opening on the Digikala page
summary; What is the best Iran radiator 24000 package?
If we want to summarize honestly and practically, all three models of 24000 Iran radiator are on the same level in terms of heating power. All of them have an output of about 24 kW, provide efficiency above 90% and are designed for medium residential units. Therefore, in terms of “heating power”, there is no significant difference. The main difference is in the user experience and the level of features. The L24FF model is more suitable for those who want more precise control, digital display and clear diagnostic system. The M24FF is a choice for those who prefer simplicity; To work, to warm, to be effortless. A24FF is placed in the middle of these two; Not quite simple and not quite advanced, a reasonable balance between price and features.
Source: Digikala Mag
How many meters is the 24,000 package suitable for?
The package with a capacity of 24000 kcal or about 24 kW is usually suitable for residential units between 140 and 160 square meters.
What is the best model of 24000 Iran radiator?
Among Iran Radiator products, L24FF and M24FF series models are among the best-selling options.
Is the 24000 two-converter package better or the single-converter package?
In most cases, dual-mode models are a better choice; Because one converter works for heating radiators and another converter works separately for water consumption.
RCO NEWS





